New Topic
TLSR8359芯片，在没有收到数据包的情况下，是否可以获取当前所在信道的RSSI，从而避开同频段的干扰？
Latest reply by:
朱佳晨
On:
Jan 06, 2023 16:11
你好！
如图，图中设置包的数量为保存到本地的数量，请问每个数据包之间的时间间隔是多少？
Latest reply by:
TL_Soyo
On:
Jan 05, 2023 14:17
An RTC timer error occurs.
The following figure was taken with "#define RTC_USE_32K_RC_ENABLE 1" at rtc.c of "telink_mesh_sdk".
The timer works
Latest reply by:
TL_Soyo
On:
Jan 05, 2023 14:04
When will "intrf_link_response_callback (u8 *p, u8 *p_cmd_rx)" be called? (TLSR825x Telink mesh sdk)
When is the function below called in Telink mesh sdk? I don't understand from the description in the sdk document.
"int rf_link_response_callback (u8
Latest reply by:
TL_Soyo
On:
Jan 05, 2023 14:30
你好！
有如下问题，麻烦解答。
1、将AOA_RX烧写进多天线板，AOA_TX烧写进单天线板，单天线板通过USB连接到电脑，多天线板通过烧录器连接到电脑，已检查连线无误，在Tscript中双击usb脚本后，没有弹出显示角度的窗口，请问这是什么原因呢？报错 write data over time
Latest reply by:
TL_Soyo
On:
Jan 04, 2023 14:21
需要使用自发电开关，做一个zigbee GreenPower开关，标准SDK的sampleLight例程支持吗？
Latest reply by:
TL_Soyo
On:
Jan 05, 2023 10:51
I have noticed that from time to time my gateway restarts (I guess after a crash/exception).
Is there a way to find out what causes the restart? Wher
Latest reply by:
wes58
On:
Jan 06, 2023 15:06
你好：
用TLSR8258F512ET48芯片做zigbee 3.0开发，SDK V3.6.8.2，zigbee switch例程，
通过analog_write(0x73,0x03)切换到外部32k晶振，但是analog_read(0x73)读取出来的值还是0x00;
问下为什么通过寄存
Latest reply by:
TL_Soyo
On:
Jan 04, 2023 09:01
ESB_ReadRxPayload();函数返回值，根据说明低字节是数据包长度，但实际使用过程中，返回长度不正确，发送的数据长度为8，该函数返回会在0x48、0x68、0x88之类的值之间切换
Latest reply by:
TL_Soyo
On:
Jan 03, 2023 10:44
烧写进去的程序如图，在Tscript中双击后，没有弹出显示角度的窗口，请问这是什么原因呢？
Latest reply by:
RAY
On:
Jan 03, 2023 11:09
Points
Top10
TL_Soyo
8895
wes58
1046
JaeYong Lee
685
youngbo830
608
TL_bloom5
607
wooseok
564
etenalstarchn
380
youliyiliao
378
HaMaster
352
TL_hk
343