I run as belows.
1) I run factory reset a sampleLight
2) I run direct join after rebooted by factory reset
( sampleLight sent "Permit Join Request" )
3) I run Coordinator
4) wait 30minutes
5) sampleLight join to a network.
( sampleLight sent "Match Description Request" and then it is joined )
Why delayed 30minutes until joined ?
How to reduce this time ?
TLSR 8367/69 |
TLSR8258 |
Telink Packet Sniffer |
tlsr8666的资料哪里能找到? |
请问TLSR8367如何烧录程序到芯片中 |
Zigbee and Wi-Fi Combo Chip |
泰凌8258的zigbee协议栈,在远距离通信的过程中协调器发生route request给路由,但是路由没有响应 |
请教一下zigbee入网最小信号强度怎么设置 |
Hi,
what version of the SDK ,and can you test with sniffer tools,it is helpful to debug.