New Topic
How to exchange coordinator or gateway(non-coordinator) mode when firmware is running ?
I use Zigbee/BLE Concurrent SDK.
Latest reply by:
JaeYong Lee
On:
May 17, 2022 18:47
我们用的SDK测试在9281上测试master模式，用的是B91_demo这个case测试，现在发现和外设（心率计）已经建立连接（app_le_connection_complete_event_handle 已经调用），但是发现一个问题没有收到心率计发过来的心率数据，我在工程的函数app_gatt
Latest reply by:
ninver2022
On:
May 19, 2022 16:15
你好，我想使用9218进行厂测程序开发，为了简化流程，直接使用抽象层的RF接口，一个设备连续发送，500ms一次，每次发包我的payload第一个字节都会自加，一个设备接收，测试中发现我只能收到第一个包，请问这是什么原因？谢谢
Latest reply by:
tanlei
On:
May 11, 2022 09:57
Latest reply by:
HaMaster
On:
May 09, 2022 16:28
I use zigbee_ble_concurrent 1.6.2.1.
I test bind_reg.
In Gateway(8258_gateway),I sent ZBHCI_CMD_BIND_REQ via zbhci interface(rs232).
But tlsr8258 n
Latest reply by:
Soyo
On:
May 09, 2022 09:17
In reply to my thread regarding to using 2 UARTs on TLSR8253, @hk.wang suggested using the tlsr9 series which support 2 UARTs.
I had a look at th
Latest reply by:
wes58
On:
May 17, 2022 05:23
这个函数怎么使用 有没有一些函数可以让设备加入指定的网关
Latest reply by:
HaMaster
On:
May 07, 2022 10:25
请问TLSR8251F512ET24的RF引脚输出端阻抗是多少？
Latest reply by:
Phil
On:
May 06, 2022 09:25
My Zigbee stack works normally for a while. After a period of time, it can t send data or receive data.
When sending data it callback error is 0x1D.
Latest reply by:
Soyo
On:
May 06, 2022 14:18
I use Zigbee BLE Concurrent SDK.
I use it as gateway.
Thus i want to receive data from end device.
The end device send as broadcast mode.
How to r
Latest reply by:
Soyo
On:
May 05, 2022 10:22